Search results
Create the page "Engine" on this wiki! See also the search results found.
Page title matches
- ...ctronic concentrated control unit (ECCS, or colloquially called the ECU or Engine Control Unit).<br /> <br /> This section is primarily based on the Parts D ...ted Control System) is the primary computer used in the Z32 to control the engine and various other components in the car necessary to it running properly. P7 KB (1,285 words) - 21:57, 5 April 2018
Page text matches
- # Remove the under-belly (if applicable) that covers the underside of the engine. Removal of the front splash shield isn't necessary. # Remove the 14mm bolt at the front of the A/C compressor securing it to the engine.7 KB (1,162 words) - 21:55, 5 April 2018
- | No cooling action; engine may<br /> overheat.<br /> <br /> Bubbles appear in sight glass.<br /> <br * Check engine [[Cooling System|cooling system]].9 KB (1,226 words) - 21:55, 5 April 2018
- ...or is removed, store in the same orientation as it would be mounted on the engine. # Start engine and set climate control to maximum cooling (AUTO/60 degrees for auto climat8 KB (1,192 words) - 21:55, 5 April 2018
- ...witched off for low pressures). NA and TT utilize different condensers and engine bay piping (both in order to clear intercooler piping in the TT model).<br/ ...extreme conditions--pipes carrying pressures of over 250 psi through a hot engine bay while subjected to vibration and harshness, and things tend to break ov7 KB (1,153 words) - 18:06, 10 September 2018
- An '''alternator''' is a device that uses the engine's rotation to generate electricity for the car's electrical system.<br /> < ...gnition system, headlights, stereo, the entire electrical system. When the engine is stopped (or in the process of starting), power is provided by the batter4 KB (590 words) - 21:55, 5 April 2018
- # Ensure the engine is at operating temperature, in P (Park) with the Overdrive switch on. # Start the engine. The A/T Light should go out after about 2 seconds.<br /> [[File:146-autodi3 KB (408 words) - 21:55, 5 April 2018
- ...can be extremely dangerous and will practically always end in catastrophic engine failure. A boost controller allows the user to both increase and limit the ...This is necessary as the boost controller monitors various aspects of the engine to determine how to vary the control solenoid.<br />10 KB (1,743 words) - 21:55, 5 April 2018
- ...s are a lot more desirable than 90,000 miles of abuse. The VG30DE(TT), the engine found in the Z32, is a very stout one. Given it's been well-maintained, a Z ...saying the engine was recently rebuilt, use discretion. A recently-rebuilt engine could have been botched and just be the owner trying to dump the problem on17 KB (2,920 words) - 21:56, 5 April 2018
- [[Category:Parts]][[Category:Engine Components]]5 KB (716 words) - 21:56, 5 April 2018
- ...t''' (more commonly referred to as a '''cam''') is a core component in the engine'''.''' It controls and actuates the opening and closing of the valves.<br / ...t heights. These can drastically alter the behavior and performance of the engine.<br />3 KB (525 words) - 21:56, 5 April 2018
- ...s to [[Ohm Test|ohm test]] them. The middle and left (while mounted on the engine) pins should read 0.7<span style="font-family: arial,sans-serif; font-size:3 KB (412 words) - 21:56, 5 April 2018
- ...with the Z32. Because the Z32 relies on a myriad of sensors to control the engine, understanding what each of these sensors does (or rather, what they ''shou Engine RPM. This should match what the tachometer of the dashboard is reading. It'14 KB (2,351 words) - 21:56, 5 April 2018
- ...cally no ill-effects. Removal of these line not only helps to simplify the engine bay and make future plenum pulls easier, but also reduce the number of pote ===On Engine===6 KB (981 words) - 21:56, 5 April 2018
- ...unted to the [[Upper Coolant Pipe|upper coolant pipe]] on the front of the engine.<br /> They are sometimes distinguished by calling one the "coolant sensor ...o a temperature, which is then used in calculating and controlling various engine control functions. For more information, see the [[ECU]] article.<br /> Wh4 KB (575 words) - 21:56, 5 April 2018
- ...ion of components assembled in such a way that they provide cooling to the engine, and provide heat for the cabin heater.<br /> * [[VG30DE(TT)|Engine Block & Heads]]9 KB (1,310 words) - 21:56, 5 April 2018
- ...ead''' is one of the major components that makes up an internal combustion engine. Bolted to the top of the block, cylinder heads house the valvetrain for ea ...exactly half of the engine's RPM, and the noise comes from the top of the engine (rather than the lower rotating assembly).<br />6 KB (924 words) - 21:56, 5 April 2018
- ...f-the-pants" upgrades out there for the car. They can be replaced with the engine in (though it can be somewhat difficult to do so), and are available for an5 KB (788 words) - 21:56, 5 April 2018
- ...arser-output">'''Drive Belts''' are belts the drive the accessories on the engine. They are driven by the crank pulley.<br/> [[Category:Parts]] [[Category:Engine]]7 KB (959 words) - 19:13, 18 April 2018
- ...ls, throttle position, and more. Meanwhile, the ECU controls various other engine components and parameters such as fuel injectors and ignition timing. Most .... Stand-alone units are used for their flexibility with certain sensors or engine components, as well as their ability to be completely customized from a sof5 KB (777 words) - 21:57, 5 April 2018
- # The red LED on the ECU and the Check Engine Light on the dash will begin blinking codes simultaneously; you can read ei ...as turning the potentiometer on the ECU. Codes can be read from the Check Engine Light.<br /> This image shows which pins to short. Insert a jumper, hold f5 KB (908 words) - 21:57, 5 April 2018
