These turbos use a GT2560R aka GT28R Ball Bearing Turbo. This turbo kit is great for the street or track. Fast Reliable Spool up with a little extra kick to it. This kit is a direct bolt on, no modifications needed. 600 RWHP is possible w/ the correct tuned setup. A 5-bolt downpipe is required, as the OEM downpipes are only 4-bolt and will not fit.

Kit includes:

2x New Garrett Modified GT2560R (GT28R) Turbochargers
2x Braided SS Oil feed lines
1x Complete Gasket Kit
2x Modified L+R Return Tubes, adapters and Bolts
2x Outlet Pipes w/ New 5-Ply Silicone Hoses and T-bolt Clamps.

2x 12-15 PSI Actuators (24-30 PSI Total) 5-Bolt Downpipes are required.

Assembly:

Turner 'Assembly Required'. Turbos are machined, but you are responsible for putting all the parts on accordingly. This saves us time, and you money, so it's a win win situation.

Bolt-On Pre-Assembled w/ Actuators, and clocked as close to mounting as possible. Depending on which Manifolds you are using, slight clocking might be necessary.

• These are brand new, genuine units direct from our authorized Garrett distributor and builder. They are not rebuilds or substituted with any other brand.
• Garrett's warranty is a 90-day period against manufacturing defects, and accepted on a "per inspection basis." It is extremely rare for new CHRAs or turbos to be faulty or defective from the factory. If failure is suspected, they will need to be sent in at the customer's expense, and they will be torn down and inspected by Turbos Direct. Garrett's warranty does not cover shipping charges in either direction.
• If following a fresh engine rebuild, which includes new turbos, smoky or oily exhaust is almost always a result of a bad rebuild and not faulty turbochargers.
• Installation errors, abuse, mishandling, or failure from external factors (foreign object damage, oil-fuel contamination, oil starvation, overheating, etc) are not manufacturing defects. Nearly all premature failures are caused by an external factors such as these, and are not covered under warranty.
• In the event that you experience a failure, and the cause is determined not to be a manufacturing defect, you will be responsible for re-assembly and return shipping.