Drive Belt

Drive Belts are belts the drive the accessories on the engine. They are driven by the crank pulley.
 

2407l.jpg

On the Z32

The Z32 has three drive belts. These provide power (rotation) to the:

• Alternator, Water Pump, and Cooling Fan (all driven by the same belt).
• A/C Compressor.
• Power Steering Pump.

Fitment

Fitment for drive belts changes depending on which crank pulley, water pump pulley, and power steering pump is being used. Refer to the chart below to make sure you're getting the right belts.

Crank	Stock Alt/WP	Overdrive Alt/WP	A/C Compressor	3-Rib Power Steering	4-Rib Power Steering
OEM	A172M-V53SMVW (NA) A172M-67ASMVW (TT) K040400 (NA) K040398 (TT)	No! >:(	A192M-F65SAVW K040378 4PK955	A195M-F65SAVW K030365	A192M-42LSAVWK040365
V1	A195M-97E0MVW K040390	A192M-F65SAVW K040378 4PK955	A192M-42LSAVW K040365	A1950-32F0M K030350 3PK890	A172M-59SSAVW K040350
V2	A195M-97E0MVW K040390	A192M-F65SAVWK040378 4PK955	A192M-42LSAVWK040365	A195M-F65SAVW K030365	A192M-42LSAVWK040365
ATI Street	K040390	K040378 4PK955	K040370	K030355	K040355
ATI Race	K040400	Nope	K040384	K030365	A192M-42LSAVWK040365

Orange part numbers are for Nissan OEM belts. Green part numbers are for Gates belts. Blue part numbers are for Bando belts. The 3-Rib Power Steering Belts are used by ALL Non-Turbo Z32s and 94-96 TTs. 90-93 TTs used 4-Rib power Steering Belts. 

V1 or V2

There are two generations of Underdrive pulleys. The V1 had an underdriven power steering pulley (the front-most section), and the V2 maintains the stock size for the power steering, and ALL V2 pullies use 4-rib power steering segments, though they can still be used with 3-rib belts. The V2 is also only available in the aluminum finish, whereas the V1 was available with several color options. Refer to the image below to determine which version you have:

v1_vs_v2_pulley.jpg

Layout

The diagram below shows the layout of the drive belts on the Z32. It is the same for all versions.