The GKTECH V2 S13/240sx/R32 subframe weld in reinforcement plates have been designed from a 3D scan with the addition of CMM data to help to reinforce your subframe where it needs it most. Laser cut, steel and dimple died for strength these plates make reinforcement of the rear subframe a heap easier than attempting to do it yourself. The V2 reinforces the area around the rear diff more and the overall fit is better than our previous V1.

Vehicle Compatibility: - Nissan 240sx - Nissan S13 Silvia - Nissan R32 GTS/GTS-T Skyline

NOTE: Rear toe arm supports are to be discarded if the subframe was originally HICAS equipped.

FAQS

Will these fit my car?

We can only confirm fitment of the vehicles listed above. If your vehicle isn't listed there then we can't be sure. Sorry

Will these fit my R32 GTR?

Although not specifically made for GTR, the traction, camber and lower control arm braces will fit, however the toe and diff brace will not.

How hard is this kit to install?

It is pretty straight forward however the subframe does need to be out of the car to weld in these plates. You'll also obviously need access to a welder. Gluing these in wouldn't be anywhere near as effective

Are these plates effective?

Yes, absolutely. Broken subframes are pretty common, especially in drift/motorsport applications. Just as people seam weld their cars, the subframe should not be forgotten. Remembering that it takes a heap of the stress under load.