The GKTECH Z33/350Z gearbox cross member for S13/S14 has been designed as a bolt on solution when fitting these gearboxes to an S chassis when running either an SR20/RB/KA24 motor. The gearbox cross member has been designed to use an OEM S13/S14 gearbox mount such as our solid mount that we make or our polyurethane mount which is due to be released late July (as seen on the photos of the cross member installed).

- 6mm steel plate, laser cut and press bent in Australia. - CAD designed - 20mm of adjustment to suit modified setups - Weighs 980grams

NOTE: Fitment is based on running an SR20 or KA24 or RB20/25/26. If you're running an engine that sits further back then the cross member most likely won't work.

FAQS

Will this shifter suit my setup?
We can't confirm every possible configuration but we can confirm that if you have an SR20 or KA24 or RB20/25/26 in an S13 or S14 with a Z33 transmission that our crossmember will fit. If you're running an engine that sits further back then the cross member most likely won't work.  

Will this suit a Z34 transmission?
Unfortunately we can't be certain as we haven't test fit on a Z34 transmission. 

Do you sell adapter plates or other conversion parts?
At this point in time we are only making shifters and transmission crossmembers. We may make an adpater kit in the future but there isn't a definitive plan.