The PPE 370Z long tube headers are designed for maximum power. Testing on a 2010 370Z Nismo showed 23whp gain on a completely stock car. Excellent gains were also seen on the base 370Z.
Our headers come with Evolution Performance Ceramic Coatings that add good looks along with thermal barrior properties that increase power and lower engine bay temps. They are also a great protection against corrosion.
The finish will stay looking great longer than a stainless steel header and perform better. Available in Polished or the Black Race Coating.
-Equal length tubing
-3/8" thick laser cut flanges
-Mandrel bent 16 gauge tubing
-Runners are welded with Silicabronze at the head flange
-Porting at flanges
-Flat sanded head flanges
-Optional ceramic coatings
-For Off Road use only.
The race headers replace the stock catalytic converters.
Formed Collector w/ Spike or Parallel Merge Collector:
The parallel merge collector flows a little smoother and will give you a little more scavenging. Depending on what your goals are on your car, it may be worth the extra money.
If you are building a high-rpm Naturally Aspirated motor and trying for every last bit of power, the parallel merge collector will give you the most power gains.
If you are building a street car with just bolt on modification, the formed collector with spike would be good enough.
If you are building a supercharged car, the standard formed collector with spike is good enough as the exhaust is pressurized and scavenging doesn't make a big difference.
Made to order: These are built to order and take approximately 4-6 weeks to complete & ship
Our new Compatibility checking feature is still being updated and revised. If you have questions about vehicle fitment, please contact us.
Will these bolt right up to Armytrix catback ?
Hey Bo, yes they are compatible with pretty much any catback, the outlets end in the exact same spot as where the cats/test pipes would be on a traditional setup.
With these headers do you reuse your oem gasket or do you have to order a different size gasket for the manifold?
- Kevin Mejia
Hey Kevin, you would re-use your OEM gasket
Do you have to clearance or modify anything to make these fit?
Hey Jay, you won't have to clearance anything, but you will need to extended your O2 sensor harnesses.
based on 1 customer reviews
Great quality headers and the ceramic coating looks perfect! Highly reccomend!