Looks like you're using an unsupported browser, so some features might not work. We recommend upgrading your browser for a better experience.

Nistune Type 3 Board ECU Upgrade - Nissan S13 S14 KA24DE SR20DE SR20DET

Manufacturer: Nistune
Product # {{ productPartNumber }}

$ 280 00
$ 260 00
7% off

Manufacturer: Nistune
Product # {{ productPartNumber }}
Product not eligible for promotional or discount codes.

Customer Questions

Question:

Will this work on a automatic trans ecu? - Tyler

Answer:

Hey Tyler, since this is just a modification to the stock ECU it should work fine, but if you'd like to reply back and send me your ECU part number (The A18- or A11 code, or 23710-xxxxx) I can make sure there's an appropriate ROM compatible with your ECU.

Question:

Is this nistune board tuned to spec when ordered through your company with provided vehicle performance specifics or is it just the board that you are receiving with out any tuning? - Matt Robinson

Answer:

Hi Matt, these do not come tuned, they will essentially have a stock ROM on them.

No Reviews Yet

Be the first to tell the world about this product.

On Sale
This product may not be legal for use on emissions-controlled motor vehicles in your area or region. Please check your local, state, and federal laws before ordering. Learn More

This product is intended for off-road/competition use, and may not be legal for use on highway or street vehicles in your area. Some products sold by Concept Z Performance may solely be used on vehicles in sanctioned competition, which may never be used upon a public road or highway, unless permitted by specific regulator exemptions (such as CARB E.O.).

It is the responsibility of the installer and/or user of the product to ensure that it is used in compliance with all applicable laws and regulations. Concept Z Performance holds no responsibility, either implied or otherwise, for any mechanical, electrical, or emissions failure resulting from using any aftermarket or performance products. Buyer assumes all risk of injury or loss which may result from using this product in a manner for which it is not intended.

Additional resources:
EPA Tampering Policy
SEMA Emissions Requirements by State

Options

$ 280 00
$ 260 00
7% off

Product not eligible for promotional or discount codes.

Description

NIStune is a real-time tuning suite designed especially for Nissans which provides the ability to:

  • Retune factory Nissan Engine Control Units (ECU)
  • Monitor gauges and map tracing on your ECU
  • Data log from your ECU using Consult, Wideband, and Auxiliary inputs

Other Features:

  • Real time tuning, map tracing, logging, and playback
  • Full Log recording for all NIStune ECUs
  • Wideband can also be recorded inline with Consult data and played back
  • Map and table copy features
  • Completely editable, multi window interface, map/table views
  • Resize injectors and change AFM capabilities
  • E85 Flex Fuel Support (Full 16x16 Fuel and Timing Flex Maps with adjustable scalars)
  • Launch Control Support (Fuel Cut & Ignition Retard)
  • AFR and auxiliary input trace against RPM and load
  • Consult display capabilities with real time diagnostic information in separate windows
  • Dual channel wide band support
  • Edit five ROM images simultaneously, with comparison capabilities
  • Intelligent display tables decoded for easy modification
  • Real time RAM monitoring system
  • Hardware and software installation guides and manuals provided

What does this mean for a vehicle owner?

You can fit a real-time daughter board to your factory ECU and turn it into a fully remappable ECU, which makes it tuneable similar to aftermarket systems for a fraction of the price. This allows you to fit larger injectors, larger Mass Airflow Meters and get your ECU tuned for these and fuel and ignition changes. You can either tune it yourself or have it professionally tuned by one of our listed workshops.

Tuning provides real time modification whilst the vehicle is running, with all changes immediately updated. Wideband feedback and other auxiliary inputs can be monitored on an internal display and traced against fuel and timing map scalings.

For more information, visit Nistune.com

The Nistune Type 3 TL Board works with the following vehicles:

  • S13 180SX (SR20DET)
  • S13 Silvia (SR20DE,DET)
  • S13 240SX (KA24DE)
  • U13 Bluebird (SR20DET)
  • B13 Sentra/NX2000 (SR20DE)
  • P10 Primera (SR20DE)
  • J30 Maxima (VE30DE)
  • Q45 Infiniti (VH45DE) [1993-1995]
  • S14 Silvia/200SX (SR20DET) [early model]
  • N14/N15 Pulsar (SR18DE, SR20DE)
  • RNN14 Pulsar (SR20DET)

When ordering, please provide your ECU part number suffix in the Comments section. This is the 5-digit suffix on the label of your ECU cover. This allows us to make sure we flash your board with the correct firmware for your vehicle.

ecupartnumber.jpg

Please Note: There was a split during the S14 Zenki's production at which point Nissan changed to an updated ECU. Type 3 (this product) works with the following ECU part numbers: 69F00, 69F01, 69F10, 74F00, 74F01, 74F10, 74F11, 75F00, 75F01, 75F10, 75F11.

For the following ECU part numbers, a Type 4 board is required instead: 74F05, 74F15, 75F05, 75F15

Feature Pack

Feature Pack firmware offers enhanced features over the standard ECU firmware for a select range of vehicles. These features include:

  • Launch Control
  • Dedicated Injection Multiplier
  • Fan Control Adjustment
  • Flex Fuel Support
  • Enhanced Tuning Simplicity

If you would like to take advantage of Feature Pack Firmware, just select that as an option above. If you prefer to use standard Nissan ROM files with your ECU, stick with Standard firmware.

Installation Service

Installing a Nistune Type 3 Board does require a degree of soldering skill. If you are not comfortable installing the board yourself, you have the option of sending your ECU to us for upgrading. Simply select this as an option above and, after placing your order, ship your ECU to us (full instructions will be provided via email once your order is placed). Typical turnaround is approximately 2-3 business days from the date we receive your ECU.

Please note that we are unable to test or repair your ECU here, so please ensure you are shipping us a known good unit prior to ordering.

Compatibility

If you have questions about vehicle fitment, please contact us.

Customer Questions

Question:

Will this work on a automatic trans ecu? - Tyler

Answer:

Hey Tyler, since this is just a modification to the stock ECU it should work fine, but if you'd like to reply back and send me your ECU part number (The A18- or A11 code, or 23710-xxxxx) I can make sure there's an appropriate ROM compatible with your ECU.

Question:

Is this nistune board tuned to spec when ordered through your company with provided vehicle performance specifics or is it just the board that you are receiving with out any tuning? - Matt Robinson

Answer:

Hi Matt, these do not come tuned, they will essentially have a stock ROM on them.

No Reviews Yet

Be the first to tell the world about this product.

Copyright 2024 Concept Z Performance