100% synthetic extreme pressure lubricant for an efficient anti wear protection, a better resistance at high temperature and a longer life time. Included friction modifier avoid noisy or dragging limited slip differential. 0% shear loss : Unshearable oil film in extreme conditions. Stays in 140 grade after KRL 20 hours shear test as requested by SAE J306 Standard, July 1998 update Very high lubricating power which decreases friction and wear. 140 grade at hot temperature to provide outstanding oil film resistance at hot temperature and/or to reduce transmission noise. Fluid at low temperature to allow easier gear shifting when the gearbox is cold. Less effort required on the gear lever to shift the gears. Suitable for any type of seal and yellow material used in gearboxes design. Anti-corrosion, Anti-foam.

• Color Visual Blue
• Viscosity grade SAE J306 75W-140
• Density at 15°C (59°F) ASTM D1298 0.906
• Viscosity at 40°C (104°F) ASTM D445 170 mm²/s
• Viscosity at 100°C (212°F) ASTM D445 24.7 mm²/s
• Viscosity index VIE ASTM D2270 178
• Flash point ASTM D92 212°C / 413°F
• Pour point ASTM D97 -36°C / -33°F