Complete upper control arm replacement allowing positive and negative camber adjustment of the front wheels. These arms will allow you to either add positive camber to your wheels (EXTEND tire life) or to add negative camber (increase handling). OUR ARMS OFFER THE MOST POSITIVE ADJUST-ABILITY OF ANY ARM ON THE MARKET (longer tire life!)

LIFETIME WARRANTY !!!

The front suspension from the factory allows zero camber adjust-ability which can become a problem especially when lowering your car. Race enthusiasts also wish to add more negative camber to increase their handling without having to "slam" their car to achieve the desired camber. These arms will allow 1.5 degrees of positive camber, and 1.5 degrees of negative camber from the factory settings. So if your car is lowered 1.5" and the front camber is sitting at 2 degrees negative camber, these arms will allow you to bring them back out to .5 degrees negative camber.

** Will fit the following vehicles:

* 07-08 Infiniti G35 Sedan
* 08+ Infiniti FX 35
* 08+ Infiniti G37 Coupe
* 09+ Infiniti G37 Sedan
* 09+ Nissan 370z

These arms are completely TIG welded and offer a huge upgrade in strength over the factory arms. They use ENERGY SUSPENSION polyurethane bushings for increased responsiveness over the factory rubber bushings. They also use a high quality 3-piece Heim ball joint protected by a polyurethane red dust bootie. These Heim joints offer the best in suspension responsiveness and smooth operation. These Heim joints are also highly serviceable and do not require any special tools to remove. The have Teflon coatings inside for "chatter" free operation for years. We have also included grease fittings for even easier service ability.

These adjustable rear camber arms will allow a full range of camber adjustment for your rear wheels. Also featuring upgraded ENERGY SUSPENSION polyurethane bushings, these arms are considerably stronger and stiffer than the factory arms.

These traction adjustable arms allow fine tuning of the rear suspension and allow slight adjustment of rear wheel toe. When lowering your car 1.5"-2" and adjusting rear camber back to spec, your toe will need to be pulled back into spec as well, which can be achieved with these arms. They also feature high quality ENERGY SUSPENSION polyurethane bushings for increased handling. The increased stiffness of the arm and upgraded bushing help to eliminate "wheel hop".

Fabricated out of high strength alloy steel, with a stainless center turnbuckle for increased stiffness and strength. Center turnbuckle has fine threads for precise adjust-ability. Arms are produced in house and are precision TIG welded.

With both the camber and traction arms, you will full adjust-ability over your camber and toe when lowered up to 2" (past 2" and an additional modification to a factory arm is needed to bring everything back to spec, please email for details)

Ships within 24 Hours