These Jim Wolf Technology exhaust camshafts for your VQ37VHR offer a 271 Degree Duration with 0.461" of Max Lift. Jim Wolf Technology has produced these exhaust camshafts to increase mid-range torque as well as top end horsepower. With supporting mods, these camshafts can add as much as 30lb-ft around 3000rpm with an additional 10hp at 7500rpm. Due to their well designed VVEL system, the intake camshaft is not necessary to upgrade.

• JWT Exhaust Camshaft (2)
• JWT High RPM Valve Spring (12)
• JWT Valve Spring Shim (12)
• JWT Extended Cam Sprocket Bolts (2)
• JWT Cam Sprocket Bolt Washer (2)
• JWT Rear Camshaft Bolt (2)
• JWT Cam Bolt Seal - Copper (2)

Note: Early models (prior to 2010) may need replacement lifters to switch to the later DLC coating, per JWT's recommendation. If needed, we do sell the later lifters here. Earlier models (prior to 01/13), will require later style spring retainers to work w/ the JWT springs, available as an option above.

Cams are made to order, please allow 1-2 weeks for production. No Returns Allowed