The GKTECH 350z/ G35 Front Upper Camber Arms (FUCA's) are used to adjust the front camber as when you lower your car negative camber is introduced. This then reduces the contact patch of your tyres and thus available traction. Our front upper camber arms will get this issue sorted!

When designing these arms we were able to incorporate more clearance in the balljoint area from the inner wheel well by 0.39' (10mm), so that the arm doesn’t make contact with the body when extended.

These arms are a direct replacement of the standard arms and allow for -0.98' (-25mm) through to 0.59' (+15mm) of adjustment compared to the OEM arm.

We also have included stackable shims which allow you to further increase adjustment by + or – 1 degree of caster.

These arms have been CAD designed, FEA tested, they are laser cut from high strength steel, are TIG welded and to finish the arms off they're E-coated (electrophoresis coating) for rust prevention.

The arms feature high misalignment PTFE lined rose/ heim joints, that we use in all our suspension arms, that are a common size bearing that can be found at your local bearing supplier, or if you need we do have them on the shelf.

We also include dust boots to keep the bearings protected.

- Lightweight design - High misalignment PTFE lined common size bearings - CNC Laser cut from high strength steel with CNC machined ends. - CAD designed, FEA tested and TIG welded - Balljoint/ Inner wheel well clearance