The GKTECH 4 to 5 lug front conversion hubs are a direct replacement of the standard item. Remove your 4 lug front hubs, and replace with these 5 lug CNC machined billet chromoly units.

Vehicle Compatibility: - Nissan S13 240sx - Nissan S14 240sx - Nissan A31 Cefiro

NOTES: - Sold as a PAIR - Bearings are NOT included however the hubs are designed to be used with the standard bearings - Studs are NOT included however the hubs are designed to be used with the standard studs or alternatively we sell +0.78" (20mm) studs - Grease trap/ABS ring and snap ring are NOT included however the hubs are designed to be used with the standard items Ie. remove the standard hubs, strip them down and assemble the new hub.

FAQS

Do you make these to suit other cars?

No, we only sell the products listed on our website. If it's not listed on here, then we don't sell it. Sorry.

Do you make these for the rear?

No, we only make the fronts however S14, S15, R32, R33 and R34 hubs fit right up (non GTR). 

Are bearings included?

No, you can buy new bearings from Nissan or any bearing shop. We don't include bearings as some people may not want to replace the bearings and the standard S13 bearings can be reused.

Is there anything else that I need to install the wheel spacers?

The only thing that you won't be able to reuse is the wheel studs so you will need new wheel studs (and 1 more than what you previously had). Apart from that, the original bearings, circlip and nut can all be reused (assuming they're in  good condition)