Avoid wasting time shopping around for all the individual parts, getting custom brake lines made up, or running generic parts that may or may not work.

The GKTECH 2 pot Nissan dual caliper bracket is unique in that it doesn't require the use of Mustang rotors (common among others) and only spaces the hub out 0.23" (7mm's) with limited modifications required to fit.

We have also added the axle spacer to the kit as the kit spaces the hub out 0.23" (7mm), this meaning the driveshaft is essentially being stretched that 0.23" (7mm). However now the difference can be taken up with the axle spacer.

We have different sized options available as it is also a good opportunity to select a different size axle spacer if you were running a different diff/driveshafts combination or have a fairly low vehicle.

Separate to that it's the only kit on the market that allows the use of the OEM drum e-brake. We also include everything required other than the calipers. If you are running Skyline or Z32 rear calipers/rotors and you want your rear brakes to lock up in an instant, this kit is the way to go. Now includes our new CNC machined aluminium handle. Available in silver, black, blue or pink.

Vehicle Compatibility: - Nissan 240sx - Nissan S13 Silvia - Nissan S14 240SX - Nissan S15 240SX - Nissan Skyline R32 GTS-T - Nissan Skyline R33 GTS-T - Nissan C33 - Nissan C34 - Nissan C35 - Nissan A31 Cefiro - Nissan 300ZX Z32

NOTE: If you are running standard hubs/knuckles the 5mm axle spacer is required NOTE#2: will NOT fit Z32 aluminium rear knuckles without some trimming of the knuckle (not too difficult) NOTE#3: For the axle spacers, we can only confirm fitment on OEM wheel bearings

FAQS

I've heard dual caliper brackets push your hub out?
Yes, some can as much as 0.47" (12mm) however our brackets only push the hub out 0.23" (7mm), which is also why we have axle spacers included. 

What modifications are required?
Fitting an extra caliper in this space is not easy but this bracket does make things a lot easier and is an easy install. Simply cut your standard brake caliper mounts off, trim your brake dust cover to suit and shave the calipers where they butt up against one another, that's all you need to do to fit this bracket. 

Can I still use my drum e-brake?
Yep, you sure can. Our kit is the only that I'm aware of that allows this. It bolts straight up with no modifications required to get your drum working as it was previously.

Is there anything else needed for installation?
Yes, everything is included in the kit with the only exception of the brake calipers (maybe $100 or so a pair from a wreckers?) and brake fluid. We include EVERYTHING else! BYO tools. 

Will this kit work with aftermarket knuckles?
The brackets are designed to be used with the OEM knuckles. They can NOT be used with aftermarket knuckles. If your aftermarket knuckles happen to have dual caliper brackets already (like ours) then you can remove the brackets from this kit by deselecting them in the dropdown menu. 

Will these work with OEM S-Chassis calipers?
No they will not. These brackets will only work with Nissan 2pot calipers and their corresponding rotor