Description
2.5"
Intercooler
piping
is
made
from
lightweight,
aircraft
grade
Aluminum
6061
and
powder
coated
gloss
black
or
silver.
The
piping
system
extends
from
the
exit
of
the
compressor,
to
the
Intercooler,
and
up
to
the
throttle
bodies.
The
pipes
maintain
the
factory
position
for
the
idle
system
on
the
driver's
side.
1.25"
ports
are
welded
for
BOV
or
recirculation
valves
near
the
stock
location
though
some
minor
relocating
is
required.
1/8"
NPT
ports
are
located
on
both
pipes
leading
up
to
the
throttle
bodies
for
either
factory
vacuum
ports
or
to
be
used
for
nozzles
for
water
injector.
Snow
Water
Injection
nozzles
will
bolt
straight
in.
Adapters
for
connects
to
vacuum
hose
or
plugs
if
ports
are
not
needed
are
provided.
The
kit
will
fit
tightly
with
larger
aftermarket
radiators
and
rubber
isolators
are
provided
to
prevent
contact
and
heat
transfer
between
the
two.
Turbo
Outlet
Pipe
Reference:
The
Stock
Turbos
use
2
different
sizes
for
their
outlet
pipes,
so
we
need
to
know
which
setup
you
have
in
order
to
provide
the
correct
couplers
to
connect
to
the
2.5"
Piping
setup.
(1.75"/2.0")
-Stock
Turbos
-JWT
Turbos
-Z1
600R
Turbos
(1.75"/1.75")
-Garrett
GT2560R/2860R
(2.0"/2.0")
-Z1
675RS/725R/800R
Turbos
Compatibility
If you have questions about vehicle fitment, please contact us.