AUS Injection has over 20 years of experience in the fuel injector industry, and has developed innovative techniques in the remanufacturing process, allowing them to produce high quality performance injectors with tolerances as precise as 10,000ths of an inch.

These injectors are not redrills, they are manufactured at 550cc injectors from the factory, and they are not remanufactured, they are brand new. These same injectors are also available as remanufactured units if desired.

Sold as a set of 6 injectors. Also includes upper and lower O-rings, and patch connectors for use with old-style (90-94) connectors. Please note that if you have a 90-94 TT, you will need an adapter kit to install these (available as an option above). Also includes connector pigtails, just cut and splice.

We also offer ECU upgrades needed to drive your injector upgrade, available as a full upgrade or EPROM only.

Specifications:

• Static Flow @ 4 bar: 649cc/min
• Static Flow @ 3.5 bar: 600cc/min
• Static Flow @ 3 bar: 550cc/min (The Z32 runs at 3 bar)
• Dynamic Flow, 50% Duty Cycle 6000 RPM, 5mS, 3 bar: 240cc/min
• Dynamic Flow, 15% Duty Cycle, 6000 RPM, 1.5mS, 3 bar: 48cc/min

Latency