Special Order: Average ETA is 2-3 weeks from time of order and cannot be cancelled once the order is placed.

When the goal is to make significantly more power, increased high pressure fuel capacity becomes essential. The AMS Performance VR30DDTT Stage 4 High Pressure Fuel Pump was engineered to meet the demands of max-effort builds, supporting ALPHA 8+ packages and delivering the fuel volume required for 700+ WHP on E85. Featuring the largest piston in the lineup at a massive 12 mm, the Stage 4 pump delivers market-leading fuel delivery as the highest flowing pump available at an exceptional 440 LPH. Its CFD optimized design is capable of operating at up to 250 bar and is paired with all stainless steel, laser welded construction for precise, leak-free performance. Every unit comes fully assembled, individually flow tested, and includes OEM-style and AN fuel line fittings, a harness adapter, a gas line shaping tool, and all necessary installation hardware. To ensure a smooth, trouble-free upgrade, installation and calibration guides are included. Ethanol and flex-fuel compatibility, combined with a Limited Lifetime Warranty¹, make this the most complete, reliable, and highest performing high pressure fueling solution available for the VR30 platform.

• Supports Max-Effort ALPHA 8+ Packages and 700+ WHP E85 Builds
• Massive 12mm Piston Providing Maximum Fuel Throughput
• The Highest Flowing Pump on the Market at an Astounding 440 LPH
• CFD Optimized Design with 250 Bar Maximum Operating Pressure
• All Stainless Steel Laser Welded Construction for Leak-free Sealing
• Fully Ethanol E85 and Flex Fuel Compatible
• Includes Harness Adapter, Gas Line Shaping Tool, and Installation Hardware
• Comes Fully Assembled and Individually Flow Tested
• Included Install and Calibration Guides For a Simple, Hassle-free Install
• Backed by a Limited Lifetime Warranty¹

Engineered to be the Best

We partnered with Nostrum High Performance, one of the industry’s most respected leaders in fuel system engineering, during the development of this component. This collaboration allows our customers to trust that our fuel pumps are among the best built and best performing options available.

Using advanced Computational Fluid Dynamics (CFD), the AMS Performance VR30DDTT Stage 4 High Pressure Fuel Pump was engineered with optimized internal fuel flow trajectories for maximum efficiency. This results in an impressive flow capacity of 440 LPH.

Each AMS VR30 pump arrives fully assembled for a quick, bolt-on upgrade and includes both OEM and AN fuel fittings, along with OEM type electrical connectors for seamless integration. This allows the pump to function properly within the factory system while providing flexibility for custom fuel system setups. Every unit is individually flow tested to verify performance and reliability, and each includes comprehensive installation instructions. The pump is capable of reaching a maximum pressure of 250 bar, delivering the headroom required for high power VR30 applications.

Put it to the Test

What truly sets this, and every AMS component, apart from the competition is our uncompromising commitment to validation. The AMS Performance VR30DDTT Stage 4 High Pressure Fuel Pump has endured a rigorous battery of in-house tests, including countless 1/4-mile and 1/2-mile passes designed to push the system to its limits. Beyond our own research and development efforts, each AMS VR30 High Pressure Fuel Pump is individually bench tested by Nostrum High Performance prior to shipping. Their state-of-the-art quality control process ensures exceptional durability, consistency, and performance long before the pump ever reaches your vehicle. To give you even greater peace of mind, every pump includes a Limited Lifetime Warranty¹ against manufacturer defects at no additional cost.

For a deeper look into the craftsmanship behind these components, we highly recommend watching the behind-the-scenes video below. You will get an inside look at Nostrum’s world-class facility, including their manufacturing, testing, R&D, and quality control processes that help make this fuel pump one of the most reliable and trusted solutions in the industry.

Product Notes

• In order to take full advantage of our HPFP, specific calibrations to your ECU tune file will need to be made. Once the HPFP is installed, the engine will start and run, however a qualified engine calibrator must review datalogs to verify the engine is running properly! Please contact an AMS sales representative to discuss your ECU tuning needs by emailing [email protected].
• Vehicles equipped with an AMS Flex Fuel Kit do not require the additional low pressure feed line. For non-AMS or no flex fuel setups, a -6AN low-pressure feed line is required for HPFP installation. This can be added via the dropdown menu.
• Please be aware there are two separate instruction guide files available for this product. The first is a physical installation guide, and the second is a calibration quick-start guide.

¹ Limited Lifetime Warranty

• Nostrum High Performance warrants to the consumer that this product will be free from defects in materials and workmanship for the lifetime of the product. This Limited Lifetime Warranty is limited to the repair or replacement of the part. In no event shall the manufacturer be responsible for special, incidental or consequential damages or costs incurred due to failure of this product. Limited Lifetime Warranty claims to the manufacturer must be transportation prepaid and accompanied with dated proof of purchase. This Limited Lifetime Warranty applies only to the original purchaser of product and is non-transferable.
• Products will be repaired or replaced when determined by the manufacturer that the product failed because of defects in material or workmanship. Limited Lifetime Warranty explicitly excludes the cost of labor for product installation and removal, diagnostics, or troubleshooting.
• The Limited Lifetime Warranty covers manufacturing defects, but damage caused by foreign object debris, from other fuel line components or installation contamination, will not be covered under this limited warranty.
• No warranty, express or implied, shall extend to any product which has been subjected to misuse, neglect, accident, or improper storage or installation or which has been repaired, modified, altered, tampered with, misused, improperly installed, or used in an improper application. The manufacturer disclaims any liability for consequential damages due to breach of any written or implied warranty on all products made by the manufacturer.
• To begin the warranty process, you may contact an AMS Performance Customer Support Representative HERE. The below listed additional information will be required to process the Limited Lifetime Warranty claim and confirm eligibility to provide further warranty inspection.
• – Original invoice, purchase date, and product installation date.
• – Diagnostic information, testing data, codes, freeze data.
• – ECU calibration file (if possible)
• – Data logs of the event
• – Full mod list including part specifics
• – Persons / company that tuned the vehicle
• Once approved, a Nostrum High Performance RMA form is required to be filled out and included with the returned part. Additional information may be required in order to test the failed component and process the claim. All approved components will be be shipped directly to Nostrum High Performance at the expense of the consumer for inspection and subsequent repair or replacement if deemed necessary.
• In the case that the product requires inspection performance testing and no damage, fault, or defect in operation is found, Nostrum High Performance, at its sole discretion, may apply a Test Service Charge of $125.00 USD and shipping will be the sole responsibility of the consumer. Payment of this fee directly to Nostrum High Performance is required prior to the return of the inspected product to the consumer.
• For further warranty information, please see nostrumshop.com/warranty

WARNING/DANGER: SERIOUS RISK OF FIRE, EXPLOSION, BODILY INJURY INCLUDING RESULTING DEATH, AND ENGINE, VEHICLE, AND OTHER PROPERTY DAMAGE. THIS FUEL PUMP MUST BE INSTALLED AND REMOVED ONLY BY A QUALIFIED MOTORSPORT TECHNICIAN. TECHNICIAN ALSO MUST BE TRAINED IN HOW TO INSTALL AND REMOVE THIS PUMP FROM THIS SPECIFIC VEHICLE. TECHNICIAN MUST NOT SMOKE OR PARTICIPATE IN ANY ACTIVITY THAT WOULD BE CONSIDERED A CATALYST FOR IGNITION WHILE INSTALLING OR REMOVING PUMP AND MUST READ THE INSTALLATION INSTRUCTIONS BEFORE INSTALLATION OR REMOVAL.