The AMS Performance VR30 Quick Flash for Q50/Q60 is a quick and effective ECU flashing solution, without the need for a long and drawn-out remote tuning session. For many Infiniti Q50 and Q60 owners, the AMS VR30 Quick Flash is the perfect inexpensive option when there is simply no need to squeeze every last bit of horsepower from the engine.

Developed with engine and drivetrain longevity as a key objective, our calibration team used their years of motorsports experience to deliver an ECU flash that will maximize horsepower for your specific modifications while minimizing the possibility of excessive wear and tear or costly repairs. This entry-level tune is everything you need to get up to speed, and nothing you don’t.

Key Features:

• Huge increase in horsepower and torque right out of the box
• Custom-tailored to your exact modifications, from stock to full bolt-on (FBO)
• Utilizes Ecutek's new phone flash system that makes the process simple
• No need to provide data logs or send emails back and forth with a tuner
• One flash through the OBD2 port and you're done
• Approx. Wheel HP: 390-405*
• Approx. Wheel TQ: 400-415*
• Approx. Boost level: 17 PSI*

Available for all 3.0L Twin Turbo-powered Q50 and Q60 vehicles, the AMS Performance VR30 Quick Flash delivers an astounding 100+ HP increase for some models and increases boost levels to approximately 17 PSI which translates into a pavement-pounding 400+ torque!*

The AMS VR30 Quick Flash is calibrated for use on your vehicle ranging from mechanically stock to “full bolt-on” (FBO). Our team will create your AMS Quick Flash calibration file based on your list of modifications to suit your vehicle perfectly. Vehicles that have aftermarket components installed such as our Red Alpha Cold Air Intake, or Red Alpha Heat Exchanger may increase the total horsepower output to higher in the expected range. For example, Q cars with full bolt-ons can expect to be closer to 405 WHP, while mechanically stock Qs will be nearer 390 WHP.*

Ecutec Phone Flash Vehicle Tunning Technology

To reprogram the ECU, the EcuTek programming interface is simply plugged into the OBD2 diagnostic port of the car and connected to your handheld device via Bluetooth.
The guided reprogramming process then only takes a few minutes to complete via EcuTek Phone Flash! Unlike other “chipping” solutions, the EcuTek Phone Flash system requires no soldering and no physical access to the ECU – an altogether quicker, cleaner, and more reliable method of tuning

What Makes The AMS VR30 Quick Flash Different Than A Custom Calibration?

The AMS VR30 Quick Flash is designed to be a quick and simple process that increases horsepower at a reasonable cost. The ECU mapping provided is pre-determined based on our years of experience calibrating these engines and is meant to be a set-it-and-forget-it solution.
Our Red Alpha Custom Calibration goes one step further than this by allowing our team to tune specifically for your exact vehicle, modifications, and use case. Because the AMS VR30 Quick Flash is an entry-level tuning solution, support for things like map switching, flex-fuel, launch control, etc. is not included.

AMS PERFORMANCE VR30 QUICK FLASH FOR Q50/Q60 INCLUDES:

• AMS VR30 Quick Flash Calibration File via E-mail
• EcuTek Flash Points (Software license fee) (Optional)
• EcuTek Phone Flash Points (Software license fee) (Optional)
• EcuTek Bluetooth Flashing & Datalogging Interface (OBD2 Plug) (Optional)

Application(s):

• 2017+ INFINITI Q60 with 3.0L Twin Turbo VR30 (Including all Sub-Models)
• 2016+ INFINITI Q50 with 3.0L Twin Turbo VR30 (Including all Sub-Models)