Looks like you're using an unsupported browser, so some features might not work. We recommend upgrading your browser for a better experience.

ZSpec Design Plenum Spacer Fastener Kit, VQ35DE - Nissan 350Z / Infiniti G35

Manufacturer: ZSpec Design
Product # {{ productPartNumber }}

$ 24 00

Manufacturer: ZSpec Design
Product # {{ productPartNumber }}

No Customer Questions Yet

Have any questions about this product? Ask a question here.

Ask a Question

Reviews

Rated 3/5 based on 1 customer reviews

Bought the plenum spacer kit to install my 5/16" MD spacer. Received the kit with the proper label and inspected all the bolts. For some reason there are eight 35mm and four 20mm that they want you to use along the outside of the plenum (bolts 10-18). These should all be 35mm. The four 20mm they supply are too short to even thread into the lower plenum even though 5/16" is almost half of the 10mm they say this kit will work with.

Options

$ 24 00

Description

The Nissan 350z benefits greatly from the enhanced airflow of a plenum spacer, but often they require you to reuse existing bolts combined with a few non-stainless hex-head fasteners. The result isn’t attractive. We’ve put together a basic enhancement solution that accommodates 10mm plenum spacers.



Instructions are included – this is a quick and easy upgrade.

Compatibility

If you have questions about vehicle fitment, please contact us.

No Customer Questions Yet

Have any questions about this product? Ask a question here.

Ask a Question

Reviews

Rated 3/5 based on 1 customer reviews

Bought the plenum spacer kit to install my 5/16" MD spacer. Received the kit with the proper label and inspected all the bolts. For some reason there are eight 35mm and four 20mm that they want you to use along the outside of the plenum (bolts 10-18). These should all be 35mm. The four 20mm they supply are too short to even thread into the lower plenum even though 5/16" is almost half of the 10mm they say this kit will work with.

Copyright 2024 Concept Z Performance