Looks like you're using an unsupported browser, so some features might not work. We recommend upgrading your browser for a better experience.

Nissan OEM Manual Transmission Synchro & Bearing Kit - Nissan 300ZX 90-97 Z32

Manufacturer: Nissan / Infiniti
Product # {{ productPartNumber }}

$ 798 58

Manufacturer: Nissan / Infiniti
Product # {{ productPartNumber }}

Customer Questions

Question:

I picked up my 91 2+2 n/a from my uncle at 98,xxx ml and the shifter plastic bushings were so worn that the shifter knob felt like it was in neutral in every gear. replaced it with brass bushings and a performance short throw shifter around 105,xxx ml. currently at 111,xxx ml and 4 gear grinds like dog in heat. If im doing any tranny work just wanna make sure this is going to do the trick plus some? - Brian Joseph Murillo

Answer:

This kit does include the 4th gear synchro which is a common problem so it likely would fix the issue. We also recommend running RedLine MT-90 fluid as incorrectly fluids can cause synchro issues on these cars, too.

Reviews

Rated 3/5 based on 1 customer reviews

Kit has almost what you need to do a basic rebuild, kit doesn’t come with the two bearings for the middle plate (in between the bell housing and tail housing) and the bearing snap rings/clips. Over all the kit works and parts are OEM Nissan :)

$ 798 58

Please be aware that Nissan / Nismo / Infiniti pricing is subject to change. Read more

Description

Compatibility

If you have questions about vehicle fitment, please contact us.

Customer Questions

Question:

I picked up my 91 2+2 n/a from my uncle at 98,xxx ml and the shifter plastic bushings were so worn that the shifter knob felt like it was in neutral in every gear. replaced it with brass bushings and a performance short throw shifter around 105,xxx ml. currently at 111,xxx ml and 4 gear grinds like dog in heat. If im doing any tranny work just wanna make sure this is going to do the trick plus some? - Brian Joseph Murillo

Answer:

This kit does include the 4th gear synchro which is a common problem so it likely would fix the issue. We also recommend running RedLine MT-90 fluid as incorrectly fluids can cause synchro issues on these cars, too.

Reviews

Rated 3/5 based on 1 customer reviews

Kit has almost what you need to do a basic rebuild, kit doesn’t come with the two bearings for the middle plate (in between the bell housing and tail housing) and the bearing snap rings/clips. Over all the kit works and parts are OEM Nissan :)

Copyright 2024 Concept Z Performance