Looks like you're using an unsupported browser, so some features might not work. We recommend upgrading your browser for a better experience.

CZP Engine Oil Cooler Kit w/ Setrab Core - Nissan 370Z / Infiniti G35 G37 Q40 Q60

Use this form to ask a question about this product only. If you have questions in regards to shipping quotes or anything else, please use our contact form.

Question:

Will this kit fit a 2014 infinity q50s 3.7 rwd - Manuel acosta

Answer:

This kit will not fit the Q50.

Question:

I have a 2017 370z Nismo, will the 25 row work/fit fine? Also will the oil lines clear the power steering lines? - Anthony

Answer:

It will fit with Nismos but you will have to move the cross-brace in the front. And they do clear the power steering lines.

Question:

Will I still use the factory spec oil filter or what filter should be used? - Jorge

Answer:

Hey Jorge, you can still use the factory oil filter with this kit.

Question:

I have a 2016 370z Nismo with the front damper. Which size oil cooler would I need? - Phillip Tran

Answer:

Hi Phillip, you can run any size you want, you just have to flip the dampener over on the Nismo.

Question:

Also, if the flow to the cooler is controlled by a thermostat, how does it fill with oil if the car is cold after installation? How much more oil will I have to add after installing the 25 row core? How much more oil will I have to add after installing the 34 row core? Which oil filter will I have to use after installation? - MARK R PROKOP

Answer:

Hi Mark, it still uses the stock filter, and we recommend adding approximately a half a quart extra when refilling the oil initially (regardless of core size, as you should fill the core with fresh oil during its installation) to fill the lines and any air pockets in the cooler core, but you'll need to check the oil level after running to get it just right. Every subsequent oil change should only require the factory recommend amount of oil.

Question:

I have the 370Z Stillen Generation III Dual Intakes (STN-402852) cold air intake system installed on my 2010 Nissan 370z coupe (Non-Nizmo). Will I be able to install your Oil Cooler with the 34 Row Setrab Core, Thermostatic Sandwich Plate, and Protected SS lines without having to do major modifications to my car? - MARK

Answer:

Hi Mark, yes our kit does fit with the Stillen Generation III Dual Intakes, our 2011 370Z track car has both the Stillen intake kit and our CZP 34 row oil cooler.

Copyright 2024 Concept Z Performance