Looks like you're using an unsupported browser, so some features might not work. We recommend upgrading your browser for a better experience.

Blitz SBC i-D Spec R Boost Controller

Manufacturer: Blitz
Product # {{ productPartNumber }}
Discontinued / No Longer Available
This item has been discontinued by the manufacturer, and it can no longer be ordered or purchased.

Discontinued

Manufacturer: Blitz
Product # {{ productPartNumber }}
Product not eligible for promotional or discount codes.

Discontinued

Product not eligible for promotional or discount codes.

Description

The Sequential Boost Controller i-D III (SBC i-D III) is the latest boost controller offer by BLITZ. this unique boost controller represents the cutting edge in boost controller technology. The SBC i-D III features the same dual solenoid design as the DSBC for maximum boost response and the capability to hold up to 36.75psi (2.5 bar). The SBC i-D III is 1/2 din size and it is compatible with internal actuators and external wastegates.

Features

Boost Unit Can display boost in PSI, bar, KPA, and kg/cm2. Four Channels - Has four different programmable boost settings.
Boost Gauge and Peak Hold This boost controller has a built in boost gauge and peak hold that can be display in both graph and digital form.
Boost Warning and Limiter This is a safety function that allows the user to set the amount of boost decrease in the event of any over boost. Warning in visual display and audible warning.
Scramble Boost The scramble boost feature allows the user to set an increase or decrease in boost for a desired amount of time.
Manual or Automatic Boost Setting The SBC i-D allows the user to set boost both in manual and automatic.
Automatic Sets boost directly, just dial in desired boost setting.
Manual Sets boost in ration, this setting will give maximum boost response. Recommended for high boost vehicles and large turbo.
Display Can display up to 6 different readings, Each reading can be displayed in both digital and graphical form. SBC i-D has the option to display 5 different vehicle readings. Power Meter i-D and SBC Optional harness are needed to display other readings. With Power Meter i-D connected, the SBC i-D can display SPEED and POWER. With SBC Optional Harness connected, the SBC i-D can display different electronic output from the ECU (ie. TPS, water temperature, oil pressure, A/F, injector pulse).
BOOST: Digital and Graphical
OPT1 / SPEED (Power Meter i-D required to display speed): Digital and Graphic Display
OPT2 / POWER (Power Meter i-D required to display power): Digital and Graphical Display
DATA 1 (SBC Optional harness required): Digital and Graphical Display
DATA 2 (SBC Optional harness required): Digital and Graphical Display
DATA 3 (SBC Optional harness required): Digital and Graphical Display
Record and Replay SBC i-D has the ability to record and replay any information that was displayed on the SBC i-D. The SBC i-D can also replay information on the Power Meter and any of the optional data that is displayed. Replay can be fast forwarded and replayed in 2x and 5x.
Speed Map The SBC i-D has the ability to control boost by speed (Power Meter i-D required). This function allows the user to fine tune the boost according to the speed of the vehicle. If Speed Map is set up by the different boost channels, the boost controller will switch channels automatically according to the speed of the vehicle. Speed is transfered from the Power Meter i-D by the infrared connection between the SBC i-D and Power Meter i-D.
Optional DisplayThe SBC i-D has the ability to display any electronic outputs from the ECU (SBC Optional Harness required Part #15053). It can read TPS, water temperature, oil pressure, injector pulse, A/F, and etc. The SBC Optional Harness will allow the SBC i-D to display up to 3 different readings, DATA 1~3. Any addition readings can be recorded and replayed.

ftphardware.jpg


Copyright 2024 Concept Z Performance