AUS Injection has over 20 years of experience in the fuel injector industry, and has developed innovative techniques in the remanufacturing process, allowing them to produce high quality performance injectors with tolerances as precise as 10,000ths of an inch.

These injectors are not redrills, they are manufactured at 550cc injectors from the factory as they're typically used as OE Injectors in Subaru applications. These same injectors are also available as brand new units if desired.

Sold as a set of 6 injectors. Also includes upper and lower O-rings, and patch connectors for use with old-style (90-94) connectors. Please note that if you have a 90-94 TT, you will need an adapter kit to install these (available as an option above). Also includes connector pigtails, just cut & splice.

This kit also includes an EPROM specifically for these injectors, as well as connectors. For 90-94 TT (early style/Phase 1) cars, we have also added the injector adapter retrofit kit at a discounted price as an option above!
Specifications:

• Static Flow @ 4 bar: 649cc/min
• Static Flow @ 3.5 bar: 600cc/min
• Static Flow @ 3 bar: 550cc/min (The Z32 runs at 3 bar)
• Dynamic Flow, 50% Duty Cycle 6000 RPM, 5mS, 3 bar: 240cc/min
• Dynamic Flow, 15% Duty Cycle, 6000 RPM, 1.5mS, 3 bar: 48cc/min

Latency