CZP / ZERO G5 Garrett Billet Ball Bearing Twin Turbo Kit (550HP) - Nissan 300ZX Z32

Manufacturer: CZP
Product # {{ productPartNumber }}

$ 2,795 00
$ 2,495 00
11% off

Manufacturer: CZP
Product # {{ productPartNumber }}
Product not eligible for promotional or discount codes.

Customer Questions

Question:

Hi, is price for pair or each? - Francois

Answer:

This is a complete kit with both turbos.

Reviews

Rated 5/5 based on 2 customer reviews

Best bang for you're buck turbo for the z excellent spool up made 592hp on e85

Great turbo, spools quick and makes great power. I had the Greddy 16G turbo's which made good power, but really late in the power band. These make more power and it happens sooner. Good investment. Install was easy, hardest part was clocking them to clear the steering column. It's a tight tolerance between the oil drain line and the column. Thanks Nick for the recommendation!

On Sale
This product may not be legal for use on emissions-controlled motor vehicles in your area or region. Please check your local, state, and federal laws before ordering. Learn More

This product is intended for off-road/competition use, and may not be legal for use on highway or street vehicles in your area. Some products sold by Concept Z Performance may solely be used on vehicles in sanctioned competition, which may never be used upon a public road or highway, unless permitted by specific regulator exemptions (such as CARB E.O.).

It is the responsibility of the installer and/or user of the product to ensure that it is used in compliance with all applicable laws and regulations. Concept Z Performance holds no responsibility, either implied or otherwise, for any mechanical, electrical, or emissions failure resulting from using any aftermarket or performance products. Buyer assumes all risk of injury or loss which may result from using this product in a manner for which it is not intended.

Additional resources:
EPA Tampering Policy
SEMA Emissions Requirements by State

Options

$ 2,795 00
$ 2,495 00
11% off

Product not eligible for promotional or discount codes.

Description

The G5 Turbo Kit by CZP / ZERO is designed to be the ultimate street turbo for the Nissan 300ZX! In essence, the G5 turbos start out in life as brand new genuine Garrett GT2554R turbochargers. The compressor wheels are replaced by Turbos Direct, one of the very few authorized Garrett Performance distributors in the US, with a new billet aluminum compressor wheel. Optionally, we also ceramic coat the compressor housing to help with intake air temperature, as the compressor housing sits extremely close to the exhaust manifold on the 300ZX.

The billet compressor wheel is based on the design of the traditional GT2554R wheel, but with several key improvements. First, billet construction is stronger than cast, allowing the center root of the wheel to shrink in diameter, and the root is made taller. The tips of the blades also extend further into the compressor housing, and the billet construction is ever-so-slightly lighter than the cast version. These changes result in a compressor wheel that moves more air (roughly 15%, according to Turbos Direct) as a cast equivalent, without sacrificing response/spool time.

Because this turbo is based on the well-known GT2554R, and only improves on the design, we believe this to be the ideal turbocharger setup for those wishing to produce roughly 550hp (depending on fuel, tuning, and other mods) while maintaining exceptional spool-up response. And because these are still Garrett turbos, we know they're just as reliable as stock turbos.

Tech Specs

  • Compressor:
    1. 54.3mm w/ 60 trim
    2. 0.80 A/R
  • Turbine
    1. 53mm w/ 62 trim
    2. 0.64 A/R
  • Wastegate Spring Pressure: 8-10psi
    1. Opens at about 10-12psi once properly preloaded.
    2. Wastegates must be adjusted before installation


Includes

  • 2x ZERO G5 Turbochargers (Based on Garrett GT2554Rs)
  • Oil Return Kit (Choice of Modified OEM Hard Tube or Silicone)
  • Braided Stainless Oil Feed Lines
  • 2x Compressor Outlet Gaskets
  • 2x Manifold to Turbo Gaskets
  • 2x Turbo to Downpipe Gaskets



Disclaimers/Requirements:

  • Requires 5-bolt Downpipes
  • LH Motor Mount Support may need to be machined for intake piping to clear (this is true of almost all upgraded turbos)
  • Depending on Manifold or Piping setup, minor clocking might be required
  • Stock intake piping may require use of paper gasket instead of included O-ring.


Compatibility

If you have questions about vehicle fitment, please contact us.

Customer Questions

Question:

Hi, is price for pair or each? - Francois

Answer:

This is a complete kit with both turbos.

Reviews

Rated 5/5 based on 2 customer reviews

Best bang for you're buck turbo for the z excellent spool up made 592hp on e85

Great turbo, spools quick and makes great power. I had the Greddy 16G turbo's which made good power, but really late in the power band. These make more power and it happens sooner. Good investment. Install was easy, hardest part was clocking them to clear the steering column. It's a tight tolerance between the oil drain line and the column. Thanks Nick for the recommendation!

Copyright 2024 Concept Z Performance