Powder Coating is now available for Akebono Calipers. Choose this option when you buy your Akebono Brake kit for the 350Z, G35, or 300ZX. Custom Color, Logo's, and Purchase of New Caliper Seals are available upon request. Allow 4-6 weeks for powder coating. Available logos are going to be; CZP, Akebono, Nissan, and Infiniti. More Pictures to come as we get these off the Ground.

We will also have a core program for those guys that already have Akebono Calipers installed. You can either send us your original calipers to get powder coated, or we can send you set, and once you return your caliper, which must be in working condition with no knicks, gashes or other damage. We will reimburse back a $1500 core fee that we bill on top of the powder coating price.

Powder Coating Process

• All parts are pre-rinsed with a pressurized acetone, methanol, tetrachloroethylene blend
• After your parts have dried they are media blasted with no more than 90 psi with 100 grit aluminum oxide
• Parts are then masked (if needed) and coated with an electrostatic charge and cured in an oven at 400°. This is not safe for plastic or rubber. Any part that has plastic or rubber needs to be removed prior to drop-off. We are not responsible for parts/pieces that have been damaged due to the heat or having to remove those parts.
• PLEASE make sure you are happy with the current condition of your metal. Powder coat is thin and will show any imperfections in the surface or welds. We CAN NOT "lay it on thicker" to hide any of these imperfections. We do not pre-heat or sand blast any current finish off prior to coating. If parts are painted or powder coated on receipt an additional charge for chemical stripping will be added. Chemical stripping is done through a third party and is market priced. For the least expensive rate and fastest turn around it is best for us to receive clean, raw metal.

Ships within 4-6 weeks