2.5" Intercooler piping is made from lightweight, aircraft grade Aluminum 6061 and powder coated gloss black or silver. The piping system extends from the exit of the compressor, to the Intercooler, and up to the throttle bodies. The pipes maintain the factory position for the idle system on the driver's side. 1.25" ports are welded for BOV or recirculation valves near the stock location though some minor relocating is required. 1/8" NPT ports are located on both pipes leading up to the throttle bodies for either factory vacuum ports or to be used for nozzles for water injector. Snow Water Injection nozzles will bolt straight in. Adapters for connects to vacuum hose or plugs if ports are not needed are provided. The kit will fit tightly with larger aftermarket radiators and rubber isolators are provided to prevent contact and heat transfer between the two.

Turbo Outlet Pipe Reference:

The Stock Turbos use 2 different sizes for their outlet pipes, so we need to know which setup you have in order to provide the correct couplers to connect to the 2.5" Piping setup.

(1.75"/2.0")
-Stock Turbos
-JWT Turbos
-Z1 600R Turbos

(1.75"/1.75")
-Garrett GT2560R/2860R

(2.0"/2.0")
-Z1 675RS/725R/800R Turbos